Multilac Gloss is easy to apply. It flows and levels well thus giving a glossy smooth finish.
Basic characteristics at 20 °C Solid Content: approx. 45-50% by weight
Flash Point: above 65 °C.
Vehicle: Synthetic resin in petrolium solvent.
Degree of Gloss: Min 75 at 20°C angle
Colours: Refer to shade card
Store at room temperature between 5 C- 48 °C
Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.
Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
200 ml, 500 ml, 1 litre, 4 litres, cotainers.
Method of Application:
Preferably by brush or roller. Can also be sprayed. Cleaning of tools: Brush and other tools must be cleaned with soap water immediately.
16-18 Sq.m / litre (depending on surface)
Touch dry - 1 hour Hard dry - 8 hours
Suitable Surface and their Preparation The surface must be dry, free from dust and other such separable substances that may prevent good adhesion.
The type of surface-preparation depends on the available surface and it's condition.
As it is impossible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.
All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.